2 x 70 cm. The glass thicknesses of 5 mm and 6 mm are available. The water repellent has an extra extended sealing strip of approx. 23 mm and fits the wide gap size of a shower. It is particularly important to note that the sealing lip can be torn off for shortening. You get the lengths 19 mm and 15 mm by simply tearing off the sealing lip element.
These shower door seals are universal for all manufacturers of glass showers of all kinds, especially for better sealing for frameless shower partitions such as swing doors, swing doors, hinged doors etc. predestinated. The sealing profile can be easily attached from below after cleaning the glass. You do not need to stick it with silicone.
Our seals are made from a water-repellent and unbreakable plastic (PVC). The clamping area is made of transparent sturdy hard PVC and the lip is made of soft PVC. The material is characterised by its UV resistance and mould resistance, which ensures a long service life of the shower seal
After removing your old seal and cleaning your shower door, the replacement seals can be attached horizontally to the lower glass edge as a water-repellent profile or splash protection profile. Each sealing profile can be easily shortened to the desired length with a Puk saw, jigsaw or a cutter knife.
With the extended rubber lip, the spray water remains in the shower. The spatial wet and dry separation is reliably guaranteed and a risk of slipping is reduced. In addition, our shower door seals are mould-resistant and hygienically easy to clean. It is worth replacing the shower cubicle seal or bathtub seal. Enhance your bathroom and shower with our seal not only functionally, but also visually appealing.