Wet and dry separation: the water barrier for the shower threshold can be used in bathrooms, kitchens or other areas that are prone to water exposure. You can bend the water-retaining sealing strip according to the environment to form a water barrier and thus effectively stop the water flow. Used in the gap between countertop and wall to prevent water from flowing into the gap and make the cabinet mold
Easy installation: first clean and dry the surface, measure and cut the water barrier, peel off the red adhesive strip on the back and stick it to the smooth surface. In the corner, we recommend that you cut the floor barrier for wet rooms to 45 degrees and then connect to 90 degrees (at low temperatures, you can use a hair dryer to heat to achieve better viscosity)
High-quality silicone material: the edge sealing strip for the bath is made of flexible TPE material, which is high temperature resistant and wear-resistant. The dam is very easy to clean and maintain. Simply wipe it with a damp cloth. NOTE: For better sealing, the edges of the water stop barrier must be filled with silicone sealant and dried for 24 hours until the sealant is cured (NOT INCLUDED)
【Size of wet room floor barrier】: we offer shower seal strips in five lengths: 0.8m, 1.5m, 2.5m, 3m, 3.5m and 5m. You can make cuts as you see fit. 12 mm H x 20 mm W, you can choose depending on the size of the gap horizontally or vertically. Reminder: the water barrier is only 12 mm high and therefore cannot meet the requirements of barrier-free showers and large water storage areas
Wide application: this shower splash guard serves multiple purposes around the house: 1. It can stay dry on the edge of the worktop such as kitchen sink, windowsill or wet room washbasin. 2. Prevent bathroom floors, bath rims and washing machines from being soaked. 3. Use as a threshold for bedroom door, bathroom door. 4. Seal gaps between surfaces